LEGRAND care NOVO Go Mode D'emploi page 10

NOVO Go
3
Get Started with NOVO Go
1 Remove NOVO Go from the box.
2 Examine the contents for defects or missing items. If something is missing or if any item has
defects, speak with your Legrand Care distributor.
3 Attach an accessory to NOVO Go, refer to
4 Charge NOVO Go, refer to
5 NOVO Go starts automatically. If it does not start, refer to
6 The software updates automatically. The Alarm button flashes yellow and the Network icon
flashes green for up to 10 minutes.
7 After the Alarm button goes off, continue with step 8.
8 Do a status check of NOVO Go, refer to
9 Do an operational test of NOVO Go, refer to
10 If the test result is unsatisfactory, speak with your Legrand Care distributor.
11 If the test result is satisfactory, you are good to go!
Get started with NOVO Go + NOVO Go DOCK
3.1
Refer to NOVO Go DOCK User Manual.
User Manual
4 Accessory.
7.1 Charge with USB Charger.
8.2 Status Check.
5 Send Alarm with NOVO
NE41 21002-02 v2.0
8.5 Set NOVO Go to On.
Go.
8