Publicité
Les langues disponibles
Les langues disponibles
NEW CONSTRUCTION
For Retrofit Installation - Skip to Page 5.
5. Attach damper/duct connector
to fan housing.
Push connector through opening from inside of housing.
Engage tabs and secure with screw from parts bag.
TABS
6. Mount housing to ceiling
structure.
Make sure bottom of housing will be flush with finished
ceiling.
For proper location using ½" ceiling material: Bend
out housing tabs (on outside of housing) to fit against
bottom of joist.
Secure housing through mounting ears with appropriate
fasteners. If mounting housing to I-joist, use wood
blocking as shown.
4
I-JOIST
WOOD
BLOCKING
HOUSING TABS
7. Connect 4-in. round duct.
8. Connect wiring.
Connect power cable to wiring plate (from parts bag)
using UL approved connector. Connect house wiring
to fan wiring. Refer to wiring diagram for connection
details. Use screw (from parts bag) to secure wiring
plate to fan housing. Re-install wiring panel and secure
with screw from parts bag.
Skip to Step 10.
Publicité
