Publicité
Les langues disponibles
Les langues disponibles
Joining Vertical Cable Ducts Back-to-Back
Remove the Tie Plates from one side of the cable ducts
and use the M4 x 8 mm Tap Screws to attach to the
adjoining cable ducts.
Using M4 x 6 mm Flat Head Screws, attach
the Mounting Brackets to the Side Panel.
Note: Mounting Brackets should align with
the labels on the side brackets.
2. Using M4 x 12 mm Pan Head Screws,
attach the Mounting Buttons to the
Mounting Brackets.
Use the Cross Brackets and
PDU Buttons to span both
vertical cable ducts.
7
Publicité
