Publicité
Les langues disponibles
Les langues disponibles
Stacking Vertical Cable Ducts
Notes
• When assembling for use in stacked vertical configurations, one of the frame Weldments is not used.
• The side panels join to the Weldment of the other cable duct.
• Remove the Door Bushings from the unused Weldment and place them in the Weldment of the other
cable duct to allow for door installation.
Place
Door Bushings
here
One of the
Weldments will
not be used
when joining
the side panels
vertically.
Using (6) M4 x 8 mm
Tap Screws, attach
the Side Panels of
the top cable duct to
the Weldment of the
bottom duct.
Upper and lower cable ducts
will share a Weldment when
joined vertically.
4
Publicité
