Publicité
Les langues disponibles
Les langues disponibles
• With the + / - Keys (5+6), you can change the settings at any time in a range from 1 –
12.
► We recommend to select the function "Power Mode" in case of steaming food or boiling
water for example. So the overheating protection "E05" will not be activated.
13.4.3
Temperature Mode
• Press the Function Key 2. to select the temperature. The preset temperature stage
"120°C" is selected and the device turns on.
• With the + / - keys, you can change the settings at any time in a range from 60 – 240°C.
(Temperature stages: 60, 70, 80, 90, 100, 120, 140, 160, 180, 200, 220 and 240°C)
► In case of grilling or cooking deep fry food we would advise you to use the function
"Temperature" as in this case you can use temperatures up to 240°C. Otherwise the
overheating protection "E05" will be activated.
13.4.4
Timer
• After the selection of the temperature mode press the button Time 4. until the
corresponding control lamps blink. The display shows the number "0". With +/- keys,
you can now select the operating time in 1-minute intervals (up to max. 180 minutes).
Once the time is up, an acoustic signal sounds and the device automatically goes into
standby mode.
► During timer operation, you can change the duration at any time with the +/- keys. With
the memory function of the device, the power stage or temperature settings remain
unchanged here.
13.4.5
Powersharing Mode
• • If both induction fields are operated, the boards will share over power sharing function
levels as follows:
left
12
11
10
right
5
6
7
caso Vario Power 3400 Classic
Please note
Please note
•
Please note
9
8
7
6
5
8
9
10
11
12
4
3
2
1
12
12
12
12
42
Publicité
