Télécharger Imprimer la page

Expondo MSW-CRF36A Manuel D'utilisation page 14

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 31
Control panel:
3.2.
Preparation for operation
POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not exceed 85%. Place the unit
in a way that ensures good air circulation. Maintain a minimum clearance of 10 cm from any wall of the unit.
Keep the unit away from any hot surfaces. Always operate the unit on a level, stable, clean, fireproof, and dry
surface and out of the reach of children and persons with impaired mental, sensory, and intellectual
functions. Place the unit in such a way that the main plug can be reached at any time. Ensure that the power
supply to the unit corresponds to that specified on the identification plate!
Before the first use, clean the inside of the refrigerator with a damp cloth soaked in lukewarm water and a
mild detergent intended for contact with food, e.g. dishwashing liquid or a small amount of baking soda. Wipe
the device dry before switching on.
3.3.
Working with the device
Connect the power supply to the refrigerator using a suitable cable - a power supply or a cable to connect to
the car lighter socket.
Use the power switch to start the device. At this point, a sound will be heard and after a while, the display
will show the current operating parameters.
Switching the device on: press the power switch button.
Switching the device off: press and hold the power switch button for approximately 3 seconds.
1 - Power switch.
2 - Settings button.
3 - Indicator of the current temperature
inside the refrigerator:
L - temperature of the left
compartment,
R - temperature of the right
compartment
When the partition is removed, the two
chambers are combined into one and the
screen displays only one temperature
4 - The current battery status from which
the refrigerator is powered (for
information).
5 - Battery protection mode from which
the refrigerator is powered.
6 - Cooling mode (MAX or ECO)
7 - Indicator of the current battery
voltage from which the refrigerator is
powered.
8 - Temperature setting buttons.
9 - USB socket.

Publicité

loading