BaByliss 9000 Serie Mode D'emploi page 9

how to USe YoUR BABYLISS 9000
INStRUCtIoNS FoR USe
• Press and hold the on/off button for
2 seconds the gentle notification
sound indicates that your styler
is switched on.
• Once the styler is switched
on it will automatically start heating
up to160°C.
• There are 3 temperature settings
160°C, 170°C and 180°C which
are indicated by the LEDs as
shown below.
• To select the temperature setting
press the on/off button once, twice
or three times.
• The LEDs will flash when your
styler is heating up and will
stop flashing once the target
temperature is reached and it
is ready to use
• If you have delicate, fine, bleached
or coloured hair, use the lower heat
setting. For thicker hair, use the higher
heat setting. We suggest when using
for the first time you test the heat
settings to ensure you've got the
correct temperature for your hair
type. Start on the lowest setting and
increase the temperature as necessary.
• Ensure your hair is dry and
combed through.
• Divide hair into sections.
• Please note: Before styling make sure the
universal heat glove is worn on the hand
which is wrapping the hair around the barrel.
• Take a section of hair, starting 2 inches from
the scalp and place the styler next to
the hair section, ensuring the end of the
styler is pointing down towards the
shoulder.
• Start winding the hair around the widest
part of the barrel. Keep winding the hair
down the length of the barrel until there
is no more hair to wrap around.
• Hold the end of the hair in place for 5-8
seconds, depending on your hair type.
Then unwind or release the section of
hair and pull the styler away.
• Repeat as necessary.
• Allow hair to cool before
combing through.
• To switch off your styler please
press and hold the on/off button
for 2 seconds. The gentle notification
sound indicates the styler has switched
off.
• Allow to cool before storing away.