Schneider Airsystems UNM 510-10-90 D Notice D'utilisation D'origine page 9

Table of contents - Part 1
1.1 General information ..................
1.2 Scope of delivery ......................
1.3 Conventional use ......................
1.4 Technical data ..........................
1.5 Components.............................
1.6 Compressor inspections .............
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1.1 General information
Observe the safety instructions!
Read the Instruction Manual!
Note: Read and memorise part 2 of the in-
struction manual!
1.4 Technical data
Suction capacity
Filling capacity
Voltage
Electric protection, delayed-action
Motor output
Max. operating speed
Compression final pressure
Switch-on pressure
Vessel capacity
Maximum permissible working overpressure of vessel
1
Oil quantity
L Sound power level according to DIN EN ISO 3744 (RL
WA
2000/14/EC)
L Sound pressure level at distance of 4 m
PA4
Overall dimensions: width x depth x height
Weight
Max. number of switching cycles
Operation/Downtime ratio
Min. distance to wall
Ambient temperature
1.
Initial filling: mineral oil up to 10 °C. Under 10 °C, use fully synthetic oil.
1.5 Components
01 Compressor unit
02 Intake filter
03 Oil filler plug
04 Oil drain screw
Subject to technical modifications. Illustra-
tions may deviate from the original.
3
1.2 Scope of delivery
3
– Compressor with instruction manual
3
– Documents accompanying compressed air
3
vessel
3
1.3 Conventional use
4
The compressor is designed for generating
and storing compressed air only. Com-
pressed air is only suitable for compressed
air tools/devices/machines.
Any other type of use is considered contrary
to the intended use.
05 Oil inspection glass
06 Pressure pipe
07 Check valve
08 Vessel
09 Condensate drain valve
UNM 510-10-90 D
510 l/min
390 l/min
400 V
16 A
3 kW
1240 rpm
10 bar
8 bar
90 l
11 bar
0,72 l
97 dB(A)
77 dB(A)
1070 x 495 x 895 mm
80 kg
10 1/h
60:40 --
40 cm
5-35 °C
GB
I/3