Publicité
Les langues disponibles
Les langues disponibles
FILLING WATER TANK (FOR STEAM IRONING)
1. Turn off and unplug unit.
2. Place unit (Ironing Plate down) on a flat, heat-resistant surface.
3. Fill Measuring Cup with water up to (1.7 oz. / 50 ml.).
NOTE: In order to extend the life of your unit and keep
it functioning at it's maximum potential, it is highly
recommended that distilled or de-mineralized water be used
in Water Tank.
4. Open Water Tank Cap. Pour water from Measuring Cup into
Water Tank (FIGURE 2). Close Water Tank Cap.
While steam-ironing, the Water Tank Windows let you monitor
the water level in the Water Tank. When the water level
becomes low:
1. Turn off and unplug unit. Allow to cool for at least 5 minutes.
2. Follow STEPS 1-3 above.
3. Plug power cord back in and resume ironing as usual.
8 | ENGLISH
FIGURE 2
OPERATING UNIT
DRY IRONING
IMPORTANT: Do not add water to the unit for dry ironing.
1. Plug power cord into a convenient electrical outlet.
2. Turn Temperature Control Dial clockwise so that Heating Light
is pointed to desired temperature (FIGURE 3). Heating Indicator
Light will illuminate.
3. When Heating Indicator Light turns off, Ironing Plate is heated
and ready for use.
NOTE: During use, Heating Indicator Light will cycle on and off as
unit works to maintain a constant temperature. You may continue
to iron while Light cycles.
Synthetics, Silks
(LOW TEMP)
Wool
(MEDIUM TEMP)
Cotton, Linen
(HIGH TEMP)
FIGURE 3
ENGLISH | 9
Publicité
