Hilti NURON SPN 6-22 Mode D'emploi page 14

4 Technical data
The nibbler comes with the SPN­CN, SPN­RN or SPN­RL accessory tool as standard. The individual
accessory tools are also available as optional accessories and are compatible with every as-delivered
version of the power tool.
Rated voltage
Weight without battery
Stroke rate at idle speed
Starting hole diameter
Smallest radius for curved cut-outs
Radius
Cutting track width
Permissible steel thickness, steel up to
400 N⁄mm²
Permissible steel thickness, steel up to
600 N⁄mm²
Permissible steel thickness, steel up to
800 N⁄mm²
Permissible material thickness, aluminum
up to 250 N⁄mm²
4.1 Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
5 Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1 Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean and dry.
3. Use an approved charger to charge the battery. → page 6
8 English
SPN 6-22
SPN­CN SPN­RN
21.6 V 21.6 V
2 kg 2 kg
(4 lb) (4 lb)
620 /min ... 620 /min ...
1,370 /min 1,370 /min
17 mm 24 mm
(0.7 in) (0.9 in)
4.0 mm •/•
(0.16 in)
•/• 50 mm
(2.0 in)
8.0 mm 5.0 mm
(0.31 in) (0.20 in)
2.0 mm / 14 ga 2.0 mm / 14 ga
(0.08 in / 14 ga) (0.08 in / 14 ga)
1.5 mm / 16 ga 1.5 mm / 16 ga
(0.06 in / 16 ga) (0.06 in / 16 ga)
1.0 mm / 20 ga 1.0 mm / 20 ga
(0.04 in / 20 ga) (0.04 in / 20 ga)
2.5 mm / 10 ga 3.0 mm / 9 ga
(0.10 in / 10 ga) (0.12 in / 9 ga)
21.6 V
See the end of these operating in-
structions
−17 ℃ ... 60 ℃
(1 ℉ ... 140 ℉)
−20 ℃ ... 40 ℃
(−4 ℉ ... 104 ℉)
−10 ℃ ... 45 ℃
(14 ℉ ... 113 ℉)
2331867
SPN­RL
21.6 V
2.2 kg
(4.9 lb)
620 /min ...
1,370 /min
24 mm
(0.9 in)
•/•
50 mm
(2.0 in)
5.0 mm
(0.20 in)
2.0 mm / 14 ga
(0.08 in / 14 ga)
1.5 mm / 16 ga
(0.06 in / 16 ga)
1.0 mm / 20 ga
(0.04 in / 20 ga)
3.0 mm / 9 ga
(0.12 in / 9 ga)
*2331867*