Quitting P-Touch Quick Editor; Maintenance; Cleaning The Print Head And Roller - Brother P-Touch 1500 PC Guide De Référence Rapide

On an IBM PC-compatible computer:
• From the application:
Right-click in the label view (or text box), and then click [Exit] in the menu that appears.
• From the taskbar:
Right-click on the P-touch Quick Editor icon in the system tray, at the right of the taskbar, and
then click [Exit] in the menu that appears.
On a Macintosh computer:
• From the pop-up menu:
While holding down the Control key, click in the label view (or text box), and then click [Quit]
in the menu that appears.
• From the application menu:
Click the [File] menu, and then click the [Quit] command.

Cleaning the print head and roller

A blank horizontal line appearing through the printed label indicates that the print head and roller are
dirty. Clean the print head and roller according to the following procedure.
1 Turn off the PT-1500PC.
2 Open the tape compartment cover.
3 Remove the tape cassette if one is installed.
4 Use a dry cotton swab to gently wipe up and
down along the print head and roller.
Caution: Be careful not to touch the cutter near the
print head and roller while cleaning them.
In addition, do not try to clean the
print head immediately after printing,
otherwise you may be burned.
5 Insert the tape cassette, and then close the
tape compartment cover.
* Cleaning can easily be done using the
optional print head cleaning cassette
(TZ-CL4).
20

Quitting P-touch Quick Editor

Maintenance

Roller
(area to be cleaned)
Print head
(area to be cleaned)
Print head
Cotton swab
Cotton swab