troublesHooting
PROBLEM
cAUsE
string trimmer
1. The battery pack is not
doesn't work.
2. no electrical contact between
3. The battery pack is depleted.
4. The battery pack or string
5. The lock-off lever and trigger
6. The motor is overloaded.
cutting attachment
1. cutting attachment is bound
will not advance line
2. not enough line on spool.
3. cutting attachment is dirty.
4. Line is tangled on spool.
5. Line is worn too short.
grass wraps around
cutting tall grass at ground level.
cutting head and
motor housing
All manuals and user guides at all-guides.com
attached to the trimmer.
the trimmer and battery.
trimmer is too hot.
are not depressed
simultaneously.
with grass.
56V LiThiUM-iOn cORdLEss 12" sTRing TRiMMER
sOLUTiOn
1. Attach the battery pack to the
trimmer.
2. Remove battery, check contacts
and reinstall the battery pack.
3. charge the battery pack.
4. Allow the battery pack or trimmer
to cool until the temperature
drops below 152°F (67°c).
5. Press down the lock-off lever and
hold it, then depress the trigger to
turn on the string trimmer.
6. stop the trimmer, remove the
battery, and clean the cutting
attachment; restart the trimmer.
1. stop the trimmer, remove the
battery, and clean the cutting
attachment.
2. Remove the battery and replace
the cutting line; follow the section
"LinE REPLAcEMEnT" in this
manual.
3. Remove the battery and clean the
spool and spool base.
4. Remove the battery and remove
the line from the spool and
rewind; follow the section "LinE
REPLAcEMEnT" in this manual.
5. Remove the battery and pull the
lines while alternately pressing
down on and releasing the
bump knob.
cut tall grass from the top down to
prevent wrapping.
27