Pressalit Indivo RK1220-21 Manuel D'utilisation Et D'entretien page 29

Disposal and recycling
This product contains reusable materials. There are no known hazards or risks
associated with disposal of the product. All components can be discarded
after being cleaned and disinfected .
When discarding, we recommend the product be disassembled into different
waste groups for proper disposal.
The following chart provides information on the recycling and handling of the
materials.
Recyclable
components
Steel
Plastics
Electronics
Aluminium
Steel can be recycled by being melted down and included
as a secondary material in the production of new steel.
Use plastic recycling systems where they are locally
available . Plastics can be incinerated for the benefit
of generating energy, such as for heat and power
production .
The electronic components should be collected
separately and returned to the designated recycling
service .
Aluminium is theoretically 100% recyclable without any
loss of its natural qualities. It requires only 5% of the
energy used to produce primary aluminium. The quality
of recycled aluminium is so high that it can be used again
and again, even in the case of anodised products as the
anodised layer is a natural part of the aluminium.
Material
en
29