Maintenance
On a weekly basis it is recommended to run the motors to their maximum
positions. Raise the product to its full height and then lower it to its lowest
position to lubricate the internal parts .
Resetting
It is also recommended on a weekly basis to reset the lifting mechanism.
• Press the "down" button until the work top stops in the lowest position.
• Release the button .
• Press and hold the "down" button once more for 5 seconds. Perform the
same operation for the wall cupboards.
en
Cleaning
The product must be cleaned with a soft cloth wrung out in mild soapy water.
Avoid the use of abrasive, etching and/or chloride cleaning agents .
26
CAUTION
!
Do not attempt to open the lifting columns.