Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
A message appears informing you that the driver is being installed automatically:
The message that the software has not passed the Windows® logo test may appear while the driver is being
installed:
After installation, "InstallShield Wizard complete" is displayed. Now remove the CD-ROM from the drive and
restart the computer by selecting „Yes, I want to restart my computer now" and clicking Finish.
After the restart, you can confi gure the WLAN adapter.
2. Quick confi guration
If you are already somewhat familiar with the confi guration of wireless LAN devices, this quick guide should
be enough to prepare the device. If you have no experience with wireless LAN devices, please read the
comprehensive instructions from page 18.
1.
Open the wireless LAN confi guration utility by clicking the Atheros Client Utility on the
Desktop or under Start/Programs/Atheros/Atheros Client Utility.
2.
Change to the Profi le management tab and click Scan!
3.
Select the required network in the list and click Activate!
4.
Name the profi le in the next window. Switch to the Security tab.
5.
Select the encryption mode used in the target network and then click Confi gure. If no encryption is used
in the target network, switch to the Advanced tab and ignore item 6.
6.
Enter the code required for the target network in the subsequent window. Switch to the Advanced tab.
7.
If you want to connect to an access point or router, we recommend that you leave all settings on this
page as they are. If you want to connect to another wireless LAN client device, e.g. a USB stick or card
bus, select Ad-hoc as the Network type and the same channel used by the client device under Channel.
8.
Click Ok to confi rm your entries. Switch to the Current status tab. All current information on your profi le
is displayed here. A green bar for the Signal strength shows that you are connected to the target
network.
Click OK to confi rm.
This only means that the test has not been performed. The sta-
bility and function of the driver was tested thoroughly before
delivery. The qualifi cation of the drivers by Hama means that
new versions can be used far earlier and do not have to wait
for the Windows® logo test. Click Continue Anyway to confi rm
the message.
17
Publicité
