Oven Positioning - Glem GFS92IX Mode D'emploi Et D'entretien

en

2.2 oven positioning

The oven is pre-arranged for built-in purposes.
The sizes must respect the quota indicated in figures 1, 2 and 3.
The upper/rear part of the cabinet must have an opening of at least 80-90 mm deep, as indicated in figure 1.
Tighten the 4 screws by firstly inserting them inside the bush and then inside the frame (figures 1/A/B).
For installations underneath the "top" surface, ensure that the rear/lower part of the cabinet has an opening similar to that shown in figure 1.
(reference C).
Do not use the door as a lever to insert the oven inside the cabinet.
Do not put pressure on the open door.
instructions For tHe installer
35