Power One AURORA PVI-AEC-EVO Guide D'installation Rapide page 14

H. System Configuration for connection to the LAN
Network (Ethernet Port)
1. Power on the system and wait for the start up phase to complete (ref.par.D).
2. Enter the main menu as administrator (See par.'B').
3. Access the menu "SETTINGS" > "NETWORK" .
Subnet mask, Gateway) may be modified using the items of the "Network" menu.This allows to configure the
system for connection to the network (by means of an Ethernet patch cable) and/or for direct connection to a
PC/laptop (by means of an Ethernet cross cable).
4. At the end of the setting operations, return to the main screen, then switch off and switch on the system to
make the settings take effect.
PVI-AEC-EVO ......
12.00.00 01/01/11
>settings
change password
>NETWORK
SET DATA
>IP method
ip setting
>IP SETTING
SUBNET MASK
>SUBNET MASK
ip gateway
>IP gateway
ip method
All manuals and user guides at all-guides.com
The parameters for connection to the LAN network (IP address,
menu pin
0***
ENTER
>datalogger
io settings
ENTER
ENTER
>IP method
manual
ENTER
>IP SETTING
10.200.
ENTER
>subnet mask
255.255.
ENTER
>IP gateway
10.200.
ENTER
13 - EN
SET PIN TO 0010
CHANGE VALUE
ENTER
CHANGE
METHOD
4. 51
CHANGE VALUE
0. 0
CHANGE VALUE
1. 1
CHANGE VALUE
NEXT
ENTER
DIGIT
ENTER
NEXT
ENTER
DIGIT
NEXT
ENTER
DIGIT
NEXT
ENTER
DIGIT