Power One AURORA PVI-AEC-EVO Guide D'installation Rapide page 13

To read the measurements of the sensors and to check their accuracy follow the instructions below:
1. Enter the main menu as administrator (See par.'B').
2. Access the menu 'CURRENT VALUES' > 'ANALOG VALUE'. The quantity value will be displayed for each of the
analog inputs.
PVI-AEC-EVO ......
12.00.00 01/01/11
>CURRENT VALUE
SETTINGS
>T1000-INTEGR
20.0 DEGC
MODEL
PVI-AEC-IRR
PVI-AEC-IRR-T
PVI-AEC-RAD-13TC
PVI-AEC-RAD-13TC-T
PVI-AEC-CONV-T100
PVI-AEC-T1000-INTEGR
PVI-AEC-T100-ADH
PVI-AEC-T100-BOX
PVI-AEC-T1000-BOX
PVI-AEC-WIND-COMPACT
PVI-AEC-WIND-DIR
For the connection of sensors mentioned above refer to diagrams in Appendix 1.
All manuals and user guides at all-guides.com
Monitoring System
menu pin
0***
ENTER
>ANALOG VALUE
DIGITAL VALUE
ENTER
AN1
CHANGE
INPUT
TYPE
2
Radiation Sensor (W/m --> V)
Radiation Sensor with integrated cell
2
Temperature Sensor (W/m
2
Radiation Sensor (W/m --> V)
Radiation Sensor with integrated cell
2
Temperature Sensor (W/m
PT100 Sensor connected to PT100/0...10Vdc
Converter ( --> V) °C
Ambient Temperature Sensor connected
to PT100/0...10Vdc Converter (°C --> V)
Adhesive module temperature sensor
(back cell) PT100
Ambient Temperature Sensor PT100
Ambient Temperature Sensor PT1000
Wind Speed Sensor (m/s --> V)
Wind Direction Sensor (° --> V)
12- EN
DISPLAY IDENTIFICATION CODE
IRR
IRR-T_Irr / IRR-T_Temp
/ °C --> V)
RAD-13TC
RAD-13-TC-T_Irr /
RAD-13-TC-T_Temp
/ °C --> V)
T100-ADH-CONV /
T100-BOX-CONV
T1000-INTEGR
T100-ADH
T100-BOX
T1000-BOX
WIND-COMPACT
WIND-DIR
SET PIN TO 0010
NEXT
ENTER
CHANGE VALUE
DIGIT
ENTER