Red Sea ReefMat 250 Mode D'emploi page 21

Activating a new fleece-mat roll
• Open the App and go to the "New roll installation" from the settings
page and select the "Full roll" option. This will activate the unit in the
normal operating "Auto-Advance" mode. If you are not installing a full
roll, see the "partial roll" instructions below.
• When installing a new roll, the entire filter chamber is lined with
clean fleece-mat and therefore it could take quite some time before
the initial fleece-mat gets blocked enough for it to be advanced. The
ReefBeat homepage will present the initial length (38cm / 15") in the
usage progress bar included in the "today" and "total usage" counters.
• If you wish to ensure that you have installed the new roll correctly,
use the "Manual Advance" option from the settings page to advance
the fleece-mat by the preset default length of 2 – 2.5cm / 0.8"-1".
Red Sea ReefMat 250
®
ENG
21