SELT SB400R Instructions De Montage page 7

Pergola SB400R
+
Anchoring the product should be done using
dedicated universal wall brackets.
Anchor the assembled structure to the
load-bearing substrate. M12 size anchors.
Anchors are not included with the product.
The leaflet is not an equivalent of a users manual
Please download the Users Manual and motors instruction
PRODUCT PROPERTIES
EN 13659
Class 6
(EN 13659)
(requirement to close the blades above 45 km/h)
Intensity to 140 L/ (hour×m
at max. duration up to 5 minutes
(depends on the number and location of outflow holes)
Allowed
Even snow weight max. 50 kg/m
Not allowed
Blades rotation is not allowed
The requirements of cleaning and maintenance are listed in the
Users Manual
INSTALLATION REQUIREMENTS
)
2
on blades
2
After assembling the entire frame, check
the compliance of the diagonals and the
parallelism and perpendicularity of the sides
of the pergola.
The electric connection should be made only
by a person with the proper qualifications
The adjustment of the motor limit switches
that is not following the motors manual can
lead to motors damage
7
EN