Publicité
Les langues disponibles
Les langues disponibles
OPEN AND FOLD THE SCOOTER
Opening the scooter
1.
With the scooter closed and the handlebar hooked to the rear tail, release the
handlebar by operating the release lever located on the hook of the handlebar
itself;
2.
Slightly lift the handlebar and guide it out of the hole by moving the handlebar
towards the output side;
3.
Raise the dumbbell to an upright position;
4.
Carefully close the lock lever, located on the lower part of the handlebar sup-
port tube.
HOW TO RECHARGE THE BATTERY
Charging procedure
1.
Open the protective cap of the charging socket located on the side of the scoo-
ter and connect the charging plug of the charger, paying attention to the inser-
tion direction;
2.
Connect the charger to the 220V
3.
The charging process is in progress with red charger LED light. The charging
process is completed when the charger LED turns green: the battery is charged
to 100% capacity;
4.
Unplug the charger from the wall socket and then the charging socket from the
scooter;
5.
Carefully close the scooter charging socket with the protective cap.
Always charge the battery in a dry and ventilated environment. Never cover the
charger during the charging process, otherwise it may be damaged. The charger is
for indoor use only.
wall socket;
36
Publicité
