Note on user guide
This manual provides the user a description of the characteristics and
operation.
The use of the vehicle is the sole responsibility of the driver who, after
reading and understanding this manual, and after asking the seller and/ or the ma-
nufacturer for any clarifications deemed necessary, considers himself suitable from
a psychological and physical point of view to the use of the vehicle.
The manufacturer declines any responsibility for damages of any kind and entity
caused to people or things as a result of using the vehicle.
The manufacturer reserves the right to make changes to the manual and the pro-
duct without prior notice.
Charger specification
Manufacturer:
Shenzhen Fuyuandian Power Co., Ltd.
Model:
FY0634201500
Input Voltage:
AC100-240V ~50/60Hz Max 1,8A
Output Voltage: 42V
Output power: 63W
Average efficiency in active mode: 87,7%
Input Power in no-load condition: 0,2W
•
Before use, read the instructions in this manual.
•
No repairable parts inside.
•
Do not expose this product to rain or moisture.
•
For internal use only.
•
Disconnect the power supply in the event of an anomaly in
the battery charging or overheating or rupture.
•
Use only the power supply supplied as
•
Securely close the charging port cover of the scooter to
protect the connector from water and
•
The external flex cable of this transformer cannot be
replaced; if the cable is damaged, the charger must be
scrapped and replaced with one new of the same model.
1,5A
28
standard.
dust.