MS-7576 Mainboard
Connectors
Floppy Disk Drive Connector: FDD1
This connector supports 360KB, 720KB, 1.2MB, 1.44MB or 2.88MB floppy disk drive.
IDE Connector: IDE1
This connector supports IDE hard disk drives, optical disk drives and other IDE
devices.
Important
If you install two IDE devices on the same cable, you must configure the drives separately
to master / slave mode by setting jumpers. Refer to IDE device's documentation supplied
by the vendors for jumper setting instructions.
En-14
All manuals and user guides at all-guides.com
* The MB layout in this figure is for reference only.
* The MB layout in this figure is for reference only.