Frigidaire GLER341CES0 Manuel D'instructions page 2

TEMPERATURE
PERM PRESS KNITS/DELICATES
MEDIUM HEAT LOW HEAT
REGULAR AIR FLUFF
HIGH HEAT NO HEAT
* SOME MODELS
Cycle Selection
Turn cycle selector clockwise to desired cycle and
setting.
Each cycle ends with a cool down period. The heat
automatically turns off and the load continues to
tumble for 5-10 minutes. This reduces wrinkling and
makes items easier to handle during unloading.
Drying time varies depending on size and dampness of
load, weight and fabric type. Room temperature and
humidity, type of installation and electrical voltage or
gas pressure can also affect drying time.
Automatic Perm Press/Delicates Cycle
This cycle is best for permanent press, knit and delicate
items. Drying time is determined automatically at the
temperature selection of your choice.
• Medium heat is suggested for permanent press
items.
• Low heat is suggested for knit and delicate items.
If the dried load cannot be removed promptly, the cycle
selector will advance to the Press Saver/Fabric Sentry
All manuals and user guides at all-guides.com
*
ON OFF
/Wrinkle-Rid setting where unheated tumbling
continues for 40 minutes to help reduce wrinkling.
Unless the Cycle Signal has been turned off (some
models), it will sound briefly every 5 minutes as a
reminder to remove the load.
Automatic Regular Cycle
This cycle is best for cotton items that can be tumble
dried.
Drying time is determined automatically at the
temperature selection of your choice. This cycle is best
for items of similar fabric, weight and construction.
• For items requiring more drying time, set cycle
selector on MORE/MAX
• For items requiring less drying time, set cycle selector
on LESS /MIN
Timed Dry Regular Cycle
This cycle provides up to 70 minutes of drying time at
START
TIMED DRY
REGULAR
the temperature selection of your choice.
Energy Saving Tips
• Keep the lint screen clean and exhaust the dryer
• Sort laundry properly and select proper temperature
• Dry only full loads. Single items and small loads
• Avoid overloading, adding wet items to a partially dry
• Dry one load after another to take advantage of a
• Opening the door needlessly causes warm air to
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
COOL DOWN START
OFF
20
PRESS SAVER
30
40
50
MORE DRY
60
70 LESS DRY
correctly.
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
usually take longer to dry.
load, and overdrying.
warm dryer.
escape, which prolongs drying time.
is at least 45°F (7°C).
P/N 134102100 (0107)
AUTOMATIC
PERM PRESS
AUTOMATIC
REGULAR