All manuals and user guides at all-guides.com
GB
NOTE: Make sure that the oven door is perfectly parallel with the front panel. If it is not, adjust it by means of the screws
you have just inserted.
7 - Fix the oven in the recess using the 4 screws and the plastic spacers provided.
8 - Screw in the door closing pin and secure it horizontal position as shown in the figure, or until it locks in place in the
case of a round pin. Fit the 4 plastic caps.
9 - Adjust the door closing mechanism by means of the adjuster screws as shown in the figure.
27