ABBINA EH 6010 IX Manuel D'instructions page 25

REPLACING THE OvEN LIGHT
Important:
The oven light must have these precise features:
a) it must be able to resist high temperatures (up to 300°C)
b) power supply: see V/Hz indicated on data plate.
c) power 25W.
d) E 14 connection.
Before proceeding, disconnect the appliance from the
main electricity supply.
- to prevent damage, place a tea cloth in the oven
- unscrew the glass cover of the light
- unscrew the old light bulb and replace it with the new one
- put back the glass cover and remove the tea cloth
- connect the appliance to the main electricity supply
All manuals and user guides at all-guides.com
REMOvING THE OvEN DOOR
The oven door can be removed quickly and easily. To do
so, proceed as follows:
- Open the door fully.
- Lift the two levers shown in fig.
- Close the door as far as the first stop (caused by the
- Lift the door upwards and outwards to remove it from
To replace fit the door, fit the hinges in their mountings
and lower the two levers.
25
raised levers).
its mountings.
GB