Seifert L35L35 Mode D'emploi page 13

All parameters are sorted in 3 separate menus.
Menu 1
Parmeter Description
Sbrd Onboard sensor Reading
S1 S1 Sensor Reading
S2 S2 Sensor Reading
d1 Digital Input 1 reading
d2 Digital Input 2 reading
Alarms Counters for Alarm 1 to Alarm 10, (alarm
AL1 - AL10 description is described in table Alarm Codes
below)
Menu 2
Parameter Description
Ct_S Control Setpoint
HA_S High Alarm Setpoint △ or ▽ to Increase/Decrease Temperature
LA_S Low Alarm Setpoint △ or ▽ to Increase/Decrease Temperature
Ht_S Heater Setpoint
C_F Celsius / Fahrenheit △ or ▽ to change between ºC and ºF
IP_1 Input 1 Invert
StAt System State
OUtP Relay Outputs
PASS Password
Revisions Nr. 1-15 - 06.12.2023
Input
△ or ▽ to Increase/Decrease Temperature
△ or ▽ to Increase/Decrease Temperature
△ or ▽ to changes between NC/NO door contact
Read Only
Read Only
△ to increase number and ▽ to change digit
An incorrect Password will reset the input to 0
The correct password opens MENU 3
Doc. nr. 99871220201USL
Range
-
-
-
0: Open
1: Closed
0: Open
1: Closed
Alarm counts up
to 250 per alarm
Setting range
Min: ccS1
Max: ccS2
Min: HAS1
Max: HAS2
Min: LAS1
Max: LAS2
Min: HS1
Max: HS2
C: Celsius
F: Fahrenheit
0: NC
1: NO
OFF: Off
dL: Idle
CL: Cooling
Ht: Heating
tSt: Test
H: Heater Relay
A: Ambient Blower relay
C: Compressor Relay
Any number between 0
and 9999
13 / 25