Installation
Instructions
TOOLS YOU WILL NEED
Ruler or tape measure
.....
_j
_and
straight edge
# ! and #2 Phillips screwdriver
Pencil
Tin snips (for cutting
damper, if required)
Gloves
Scissors
(to cut template, if necessary)
Saw (saber, hole or keyhole)
Electric drill with
3/16",
_/2"
and 5/8" drill bits
Stud finder or Hammer (optional)
(optional)
Filler blocks or scrap wood
pieces, if needed for top
cabinet spacing (used on
recessed bottom cabinet
installations
only)
Safety goggles
Level
Duct and masking tape
MOUNTING SPACE
Bottom edge of
cabinet needs
to be 33" or
more from the
cooking
surface
Backsplash
NOTES:
•
The space between
the cabinets
must be
30" wide and free of obstructions.
•
This microwave
oven is for installation
over
ranges
up to 33" wide.
•
If you are going to vent your microwave
oven to the outside,
see Hood Exhaust
Section for exhaust
duct preparation.
•
When
installing
the microwave
oven
beneath
smooth
flat cabinets
be careful
to follow the instructions
on the top
cabinet
template
for power cord
clearance.
7