Publicité
Les langues disponibles
Les langues disponibles
TROUBLE SHOOTING
Fault
Compressor not
No power supplied
working
Battery in poor condition.
Faulty electronic unit.
Electronic unit failure
Interior not cold
Ambient temperature too high.
Insufficient ventilation Frost on
evaporator
Condenser clogged
Error message will be displayed if the voltage of the battery is low or in the event of
any malfunctions- (see next table).
When error message is displayed, the unit will be on "standby mode". Operations
will stop.
ERROR CODE
DOT INDICATION
Push "MODE" button
⇒ E-01 and current
voltage display
E-04
E-05
E-06
E-07
If the problem still persists after going through the chart above, consult an ENGEL
service agent or dealer near you.
Never disassemble the refrigerator by yourself. Inadequate repairs can lead to
considerable hazards.
For more information contact:
All manuals and user guides at all-guides.com
Possible cause
Table
DESCRIPTION
Abnormal Input Voltage
Ambient Temperature is too low
Temperature sensor cord is shorted
Temperature sensor cord is open
Abnormal Input Voltage(too high)
ENGEL USA
561.743.7419
www.engel-usa.com
info@engel-usa.com
8
Action
Check if power is supplied to
electronic unit.
Check fuse.
Check polarity of connectors and
cables.
Keep refrigerator sufficiently
ventilated.
Defrost evaporator.
Clean condenser.
SOLUTIONS
Check whether the power
voltage is too low.
Check whether the ambient
temperature is too low.
Contact service agent.
Contact service agent.
Check whether the power
voltage is too high.
SAWAFUJI ELECTRIC CO., LTD.
GUNMA, JAPAN
www.sawafuji.co.jp/english/
(Cat. No. 5490 306 5010)
Printed in Thailand
Publicité
