Pattfield Ergo Tools PE-108 US Traduction De La Notice Originale page 88

product overview
1 Chuck
2 Chuck ring
3
LED
4
On / Off switch
5 Battery
6 Gear selector
7 Torque ring
8 Rotation direction switch
9 Battery release buttons
10 Charging station
11 Charger LED lights
12 Battery base
13
Power supply cable
14
Power plug
connect chArgIng StAtIon
1 Plug the power plug
wall socket.
86 EN
using the tool
1. Set the desired rotation speed range on
2. To switch on the tool, press the on / off
3. Make sure your workpiece can not slip.
4. To switch off the tool, release the on / off
switch, in order to lock the drill driver.
Intended use
The tool is intended for driving in and loos-
ening screws as well as for drilling in wood,
metal and plastic. The tool is not intended for
commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
14 into a suitable
the gear selector 6.
Lo Screw driving /
Larger diameter drilling
hi Smaller diameter drilling
switch 4. The deeper the on / off
is pressed, the faster the drill driver ro-
tates.
Start working, while holding the tool
firmly.
switch 4.
caution! If the drill driver is not in
use, centre the rotation direction
caution! Only use the provided bat-
tery and charging station.
switch 4