Nyos VIPER Instructions page 3

Adjustable return pump
SAFET Y INSTRUCTIONS
• Check that the voltage shown on the label of the unit cor-
responds to the voltage of the mains supply.
• The pump must be connected only to power supplies with
residual current
• circuit breaker (RCCD) with sensitivity of max 30 mA.
• Units supplied with an earthed plug must be connected to an
earthed socket only.
• Units marked with
• Always disconnect all electrical appliances from the mains
before placing your hands in the water.
• The line cord cannot be replaced or repaired. Should the cord
become damaged the appliance must be discarded.
• Should the cord become damaged the appliance must be
returned to Nyos Aquatics GmbH or their service.
• This unit must not be used in swimming pools or bathrooms.
• This appliance has been designed for use in fluids up to 35°C.
• The pumps typ T3 / model Viper 3.0, Viper 5.0 and typ T3C
model Viper 2.0 with 2-core cable and 2 pins plugs are
aquarium pumps and are for indoor use only.
• Keep these instructions for further reference.
• This appliance can be used by children older than 3 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they
have been given supervision or instruction concerning use
of the appliance in a safe way and understand the hazards
involved. Cleaning and user maintenance shall not be carried
out by children without supervision. Always disconnect the
appliance from the supply before assembling, disassembling
or cleaning. Appliances can be used by persons with reduced
on the label are for indoor use only.
3