Blomberg BOTR30100B Manuel D'installation page 15

Installation
5
Plate position—beneath framed recessed
cabinet bottom
NOTE:
IT IS VERY
READ AND FOLLO IMPOR TANT
IN THE INSTA W THE TO
BEFOR E PROC LLATIO N INSTR DIREC TIONS
REAR WALL EEDIN UCTIO
This Rear TEMPL G WITH THIS NS 3/8" TO EDGE
mounting Wall Template ATE.
outlet. plate and serves to position 12"
1. Use to locate the horizonta the bottom
accuratel a level to check l exhaust
2. Locate y. that the template
right side and mark at least is positione d
of the centerline one stud on the left 4"
screw mounted It is important to use at . or
of the microwav firmly in a stud to least one wood
locations for the supplied e. Mark two additiona support the weight
3. Drill holes in the marked toggle bolts. l, evenly
a stud, drill a 3/16" locations spaced
that do not line hole for wood screws. . Where there is
toggle bolts. up with a stud, drill 5/8" For holes
DO NOT holes for
4. Remove AT THIS TIME. INSTALL THE MOUNTI
5. Review the template NG PLATE
installatio the Installatio from the rear wall.
n situation. n Instructio n book
for your
versión Darle vuelta a la hoja
en Español para consulta
. r la
Locate
and mark
mounti ng plate. holes to align with
IMPOR holes in
LOCAT TANT: the
E AT LEAST
THE CENTE ONE STUD
MARK RLINE . ON EITHE
THE LOCAT R SIDE OF
SPACE D TOGG ION FOR 2 ADDIT
AREA. LE BOLTS IONAL
IN THE MOUN , EVENL Y
TING PLATE
Trim the
rear wall
templa te along
the dotted
line.
Locate and mark
mounti holes to
ng plate.
IMPOR TANT:
LOCAT
THE CENTE E AT LEAST
RLINE ONE STUD
MARK THE LOCAT .
SPACE ION FOR
D TOGG LE BOLTS
AREA.
C L
Draw a vertical line on the wall at the center of the
30 space.
ʺ
Tape the Rear Wall Template onto the wall
matching the centerline and touching the bottom
cabinet frame.
Plate position—beneath recessed bottom
cabinet with front overhang
NOTE
: IT IS
READ AND FOLLO VERY IMPOR
IN THE INSTA W THE TANT TO
BEFO RE PROC LLATIO DIREC TIONS
REAR EEDIN N INSTR UCTIO
This Rear WALL TEMP G WITH NS
mounting Wall Template LATE. THIS 3/8" TO EDGE
outlet. plate and serves to position 12"
1. Use to locate the horizonta the bottom
accurate a level to check l exhaust
2. Locate ly. that the template
right side and mark at least is positione d
of the centerlin one stud on the 4"
screw mounted It is importan t to use e. left or
of the microwa firmly in a stud at least one wood
locations for the ve. Mark two additiona to support the weight
3. Drill holes in supplied toggle l, evenly
a stud, drill a 3/16" the marked locations bolts. spaced Trim the
that do not line hole for wood screws. . Where there is rear wall templa
toggle bolts. up with a stud, drill 5/8" For holes te along
AT THIS DO NOT holes for the dotted
4. Remove TIME. INSTALL THE MOUNTI
5. Review the template NG PLATE
installatio the Installatio from the rear wall.
n situation . n Instructio n book
for your
Darle vuelta
versión a la hoja
en Españo para consulta
l. r la
Locate
mount and mark holes to
ing plate. align with
IMPOR TANT: holes in
LOCA the
THE CENT TE AT LEAST
ERLIN ONE STUD
MARK THE LOCA E. ON EITHE
SPAC TION FOR R SIDE OF
ED TOGG 2 ADDIT
AREA . LE BOLTS IONAL
IN THE MOUN , EVEN LY
TING PLATE
Trim the
rear wall templa
te along
the dotted
line.
Locate
and mark
mount ing plate. holes to align with
IMPOR holes in
LOCA TANT: the
TE AT
THE CENT LEAST ONE STUD
MARK ERLIN E. ON EITHE
THE LOCA R SIDE
SPAC ED TOGG TION FOR OF
AREA . LE BOLTS 2 ADDIT IONAL
IN THE , EVEN
MOUN TING PL LY
Your cabinets may have decorative trim that inter-
feres with the microwave installation. Remove the
decorative trim to install the microwave properly
and to make it level
Over The Range Convection Microwave Oven / Installation Manual
Trim the
rear wall templa
te along
the dotted
line.
align with
holes in the
ON EITHE R SIDE
OF
2 ADDIT
IN THE IONAL , EVENL
MOUN Y
TING PLATE
33 to Cooktop
ʺ
Draw a line on the
back wall equal to the
depth of the front
overhang.
line.
READ NOTE: AND FOLLOW IT IS VERY IMPORTAN
IN THE BEFORE INSTALLAT THE DIRECTION T TO
REAR WALL PROCEEDI ION INSTRUCTI NG WITH ONS S
mounting This Rear Wall Template TEMPLATE . THIS 3/8" TO EDGE
1. Use outlet. a level plate and to locate serves the horizontal to position the bottom 12"
2. Locate accurately. and mark to check that the template is positioned exhaust
right side It is important of the centerline. at least one stud on the left or 4"
of the microwave. screw mounted firmly in a stud to use at least one wood
locations 3. Drill for the holes in Mark two supplied toggle additional, to support evenly the weight
that do a stud, not line drill a 3/16" the marked hole for locations. wood screws. bolts. Where there is spaced Trim the rear wall template
toggle DO NOT bolts. up with a stud, drill 5/8" For holes holes for along the dotted
4. Remove AT THIS 5. Review TIME. the template INSTALL THE MOUNTING PLATE line.
installation the Installation situation. Instruction from the rear wall.
book for your
Darle vuelta versión en Español. a la hoja para consultar
la
mounting Locate and mark holes to
IMPORTAN plate. align with holes in
THE CENTERLIN LOCATE AT LEAST T: the
MARK THE LOCATION E. ONE STUD ON EITHER
SPACED TOGGLE FOR 2 SIDE OF
AREA. BOLTS IN THE ADDITIONA MOUNTING L, EVENLY
PLATE
Trim the
rear wall template
along the dotted line.
Locate
mounting and mark holes to
IMPORTAN plate. T: align with holes in the
THE CENTERLIN LOCATE AT LEAST ONE STUD
MARK THE LOCATION E. ON EITHER
AREA. SPACED TOGGLE FOR 2 ADDITIONA SIDE OF
BOLTS IN THE MOUNTING L, EVENLY
PLATE
C L
33" to Cooktop
The microwave must be level.
Use a level to make sure the cabinet bottom is lev-
el.
If the cabinets have a front overhang only, with
no back or side frame, install the mounting plate
down the same distance as the front overhang
depth. This will keep the microwave level.
1. Measure the inside depth of the front overhang.
2. Draw a horizontal line on the back wall an equal
distance below the cabinet bottom as the inside
depth of the front overhang.
3. For this type of installation with front overhang
only, align the mounting tabs with this
horizontal line, not touching the cabinet bottom
as described in subtitle 5.1.4.
15 / 63 EN