Kemper 686 01 Instructions D'installation Et D'utilisation page 13

EN
Content
Safety instructions
1 Properties I Technical data
1.1 Properties
1.2 Technical data
1.3 Dimensions
1.4 Materials
2 Installation
3 Connection as a 2-point controller
4 Maintenance
5 Spare parts list
6 Wiring instruction for KHS components
with electrical connection
Manufacturer's address
Gebr. Kemper GmbH + Co. KG
Harkortstraße 5
57462 Olpe
Tel.: +49 2761 891-0
Web: www.kemper-group.com
After-sales service
Service-Hotline
Tel.: +49 2761 891 800
Mail: anwendungstechnik@kemper-group.com
Liability
The manufacturer assumes no warranty or
liability in the event of:
- Failure to observe the instructions in this
manual,
- Incorrect installation and/or operation,
- Unauthorised modification of the product,
- Other improper methods of operation.
Safety instructions for installation and maintenance
13
15
15
15
16
16
17
19
20
21
21
© www.kemper-group.com – 01.2024 / K410068601001-00 – 13 /60
Use
The KEMPER quarter turn stop valve PLUS with
spring-reset servo drive is designed for use in
drinking water installations with the KHS-Hygiene
system and is suitable for maintenance, stop and
protection valve.
Only use the KEMPER quarter turn stop valve PLUS
with spring-reset servo drive
- in sound condition
- as intended
International approvals
WRAS
SVGW
Norms
EN 50581
EN 60730-1
EN 60730-2-14
Directive Figure 686 01 l 686 05
RoHS-Directive 2011/65/EU
Directive 2004/108/EG (2014/30/EU)
for the electromagnetic compatibility
Directive 2006/95/EG (2014/35/EU)
Low voltage directive
for Figure
686 01
686 05
686 05