Replace the lamp
The internal light is a LED type. To replace the lamp, please contact qualified technician.
Problem
Possible Cause
Appliance does not
Temperature regulation knob is set
work.
at number "0".
Mains plug is not plugged in or is
loose.
Fuse has blown or is defective.
Socket is defective.
The food is too warm.
Temperature is not properly
adjusted.
Door was open for an extended
period.
A large quantity of warm food was
placed in the appliance within the
last 24 hours.
The appliance is near a heat
source.
Appliance cools too
Temperature is set too cold.
much.
Unusual noises.
Appliance is not level.
The appliance is touching the wall
or other objects.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall.
Water on the floor.
Water drain hole is blocked.
All manuals and user guides at all-guides.com
Troubleshooting
Solution
Set the knob at other number to switch on
the appliance.
Insert mains plug.
Check fuse, replace if necessary.
Mains malfunctions are to be corrected by an
electrician.
Please look in the initial Temperature Setting
section.
Open the door only as long as necessary.
Turn the temperature regulation to a colder
setting temporarily.
Please look in the installation location section.
Turn the temperature regulation knob to a
warmer setting temporarily.
Re-adjust the feet.
Move the appliance slightly.
If necessary, carefully bend the component
out of the way.
See the Cleaning and Care section.
20