Zyxel PL-100 Mode D'emploi page 5

• Use the PL-100 Configuration Utility to detect all other Homeplug devices on
your power line network. Try plugging a second Homeplug device into an
adjacent socket (to your PL-100) and see if the lights light up. If you are still
having a problem, please contact our technical support line.
The ETHN LED is off, the Ethernet port does not detect a LAN connection.
• Check the Ethernet adapter on your computer and make sure it's enabled and
working properly.
Check that all Ethernet cables are securely connected at all ports and are the
correct type (Cat-5 or higher).
ENGLISH
4