SELT Pergola SB500R Instructions De Montage page 7

Pergola SB500R
+
The ready made construction should be
installed to the ground. The M12 bolts. The
bolts have not been added to the product.
Selt supplies the nut and washer for the
assembly (without anchor).
The leaflet is not an equivalent of a users manual
Please download the Users Manual and motors instruction
PRODUCT PROPERTIES
EN 13659
Class 6
(EN 13659)
(requirement to close the blades above 45 km/h)
Intensity to 140 L/ (hour×m
at max. duration up to 5 minutes
(depends on the number and location of outflow holes)
Allowed
Even snow weight max. 75 kg/m
Not allowed
Blades rotation is not allowed
The requirements of cleaning and maintenance are listed in the
Users Manual
INSTALLATION REQUIREMENTS
)
2
on blades
2
After assembling the entire frame, check
the compliance of the diagonals and the
parallelism and perpendicularity of the sides
of the pergola.
The electric connection should be made only
by a person with the proper qualifications
The adjustment of the motor limit switches
that is not following the motors manual can
lead to motors damage
7
EN