Publicité
Les langues disponibles
Les langues disponibles
EngLIsh
As you use the trimmer, the string will get shorter due to wear.
Gently bump the trimmer on the ground while running at
normal speed and the line will feed.
nOTE: Extending nylon line beyond the 330 mm swath will
negatively affect performance, runtime, and the life of the
trimmer due to potential of damaging motor. Doing so may
void the warranty.
Helpful Cutting Tips
•
Use the tip of the string to do the cutting; do not force string
head into uncut grass.
•
Wire and picket fences cause extra string wear, even
breakage. Stone and brick walls, curbs, and wood may wear
string rapidly.
•
Do not allow spool cap to drag on ground or other surfaces.
•
In long growth, cut from the top down and do not exceed
304.8 mm high.
•
Keep trimmer tilted toward the area being cut; this is the
best cutting area.
•
The trimmer cuts when passing the unit from the left to
right. This will avoid throwing debris at the operator.
•
Avoid trees and shrubs. Tree bark, wood moldings, siding,
and fence posts can easily be damaged by the string.
Reloading the Cutting Line (Fig. J, K)
WARNING:
personal injury, turn appliance off and remove
battery before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.
CAUTION:
spools and line. Using any other manufacturer's line
can reduce performance, damage the trimmer or cause
personal injury. Your trimmer uses 2.032 mm diameter
line, however a 02.413 mm line may be used as long as it is
spiral-shaped with smooth, round edges, but may reduce
runtime of the trimmer.
CAUTION:
cutting line protrudes beyond the trimming blade, cut it off
so that it just reaches the blade.
Use only D
WALT replacement line.
e
1. Remove battery.
2. Cut a max of 8 m length of trimmer line.
3. Align spool housing eyelets
spool head
25
as shown in Figure J.
4. Thread one end of the trimmer line through an eyelet. Guide
the line through to the second eyelet and continue to pull
the line through until there are equal lengths of string on
each side of the spool housing as shown in Figure J.
5. Secure the spool cap
26
your other hand, wind the string onto the spool by rotating
38
To reduce the risk of serious
Use only D
WALT replacement
e
To avoid appliance damage, if the
23
with the arrow
24
on the
from moving with one hand. Using
the spool head
25
anti-clockwise as shown in Figure K.
Continue winding until 127 mm of string remain on each
side of the spool housing.
Replacement Accessories
WARNING:
personal injury, turn appliance off and remove
battery before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.
WARNING:
recommended by D
could be hazardous.
WARNING:
accessory or attachment other than those recommended
by D
WALT on this trimmer. Serious injury or product
e
damage may result.
Use D
WALT replacement line Model No. DWO1DT801
e
or DWO1DT802.
•
When replacing the line, use only 2.032 mm diameter line
(Model No. DWO1DT801 or DWO1DT802) is recommended.
For optimal performance, do not use 2.413 mm line. Other
sized may degrade performance and cause damage to
the trimmer.
MAINTENANCE (FIG. L)
Your D
WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
WARNING:
personal injury, turn appliance off and remove
battery before making any adjustments or
removing/installing attachments or accessories. An
accidental start-up can cause injury.
1. Keep the air intake slots
avoid overheating.
2. Your trimmer line can dry out over time. To keep your line in
top condition, store spare line in a plastic, sealable bag with
a tablespoon of water.
3. Plastic parts may be cleaned by using a mild soap and a
damp rag.
4. The line cutter on the edge of the guard can dull over time.
It is recommended you periodically touch-up the sharpness
of the blade with a file.
The charger and battery pack are not serviceable.
Lubrication
Your power tool requires no additional lubrication.
To reduce the risk of serious
The use of any accessory not
WALT for use with this appliance
e
Do not use any blades, or any
To reduce the risk of serious
27
, shown in Figure L, clean to
Publicité
