Publicité
Les langues disponibles
Les langues disponibles
6. Install the Floor Bolts
Make sure the plastic anchor on the end of the bolt is relaxed and
not expanded.
Carefully run the bolt through one of the seat holes near the basin
of the toilet.
When the end of the bolt is properly positioned, the top of the
bolt will seat firmly in the hole, slightly below the level of the
toilet. If the bolt sits higher than the toilet, it is not properly
seated in the floor.
Repeat with the second bolt.
Using the provided hex wrench, evenly tighten each bolt until the
toilet is firmly held in place (confirm by trying to rock the toilet).
Kohler Co.
All manuals and user guides at all-guides.com
Wall
Plastic
Anchor
Bolt
9
1052867-2-A
Publicité
