i'coo pico 7 Mode D'emploi page 17

All manuals and user guides at all-guides.com
forward and the hood stretchers downward (4a).
• To close the hood, push the hood stretchers upward
and the front of the hood backwards (4b).
push bar
• Press the knob on the handle of the push bar to
adjust the height (2).
• Release the knob and move the push bar until it
locks.
parking brake
• To apply the brake: push the brake pedal down with
your foot (5a). The brake is engaged when the red
stripe is visible.
• Press the pedal backwards to release the brake
(5b).
storage spaces
• Underneath the frame, between the wheels, there
is a shopping basket. The maximum permitted
weight in this basket is 3 kg.
• On the back of the hood there is a storage space
(max. load 0,5 kg). This can be accessed through
the zipper.
• The reclining part of the seat has a back pocket
(max. load 0,5 kg).
NOTE: Use only the indicated storage spaces and do
not exceed the maximum permitted weight.
car seat e-care
For newborn children you can also use the e-care. The
e-care is a seat that can be used both as a car safety
seat and on the i'coo stroller (using the e-care adapter
set).
Please take care thhat the car-seat is fixed against the
direction of motion so the child looks to the mother.
• Put the bumperbar in the highest position by
pushing the buttons on both sides of the bumperbar
simultaneously and turn (6)
• Pull out the carseat locking hooks on both sides.
They are situated at the inside of the hood, close to
the frame connection (7a).
• Ensure that both hooks are fully erected. (7b).
• Place the carseat on the bumperbar and push the
carseat down until a distinct click sound can be
heard. (8a-c)
• The carseat is now in locked position.
• To release the carseat from the stroller, simply push
the unlockbuttons on both sides under the edge of
the careseat and lift the carseat. (9)
(sold separately)
5