i'coo pico 7 Mode D'emploi page 15

All manuals and user guides at all-guides.com
start
The package consists of:
• frame
• seat, hood and bumper bar
Assembling sequence:
 Unlock frame lock(see FOLDING/UNFOLDING).
2 Unfold frame.
3 Attach seat (see SEAT).
4 Attach bumper bar (see BUMPER BAR).
5 Attach hood (see HOOD).
folding and unfolding
Folding and unfolding is easiest if you stand behind the
stroller.
Unfolding:
• Release the frame lock by pulling the plastic part
marked with the arrow (on the left-hand side of
the push bar) towards you ().
• Now pull the push bar upwards (2).
• When the stroller is almost unfolded, you can lock
the frame with a short upward push on the push
bar (3). The frame is locked when you hear a click
on both sides. Check that the frame is properly
locked by applying light pressure to the push bar.
Folding:
• Release the locked frame by pulling the plastic part
marked with the arrow (on the left-hand side of
the push bar) towards you while pushing the push
bar to the lowest position (4).
• Bring the push bar down (5) until it is locked to the
frame and the entire stroller has been folded (6).
wheels
The front wheels have 2 positions (7):
• put the handles on the wheel blocks up for free
steering wheels.
• put the handles down to fix the wheels in straight
forward position.
seat
Assembling:
To attach the seat to the frame, close all straps and
snaps of the seat:
• Put the side parts (8 a ) around the tubes and close
the snaps.
• Attach the upper strap through the special plastic
3