SCHUBERTH C5 CARBON Mode D'emploi page 38

D. PUTTING THE HELMET ON AND
TAKING IT OFF
1. PUTTING ON THE HELMET AND CHECKING THE FIT
1. Open and lock the chin bar. Make sure the sun visor is retracted into the
helmet shell.
2. Open the chinstrap and chinstrap comfort pad.
3. Pull apart the lower ends of the chinstrap.
4. It will now be easy to put the helmet on.
5. Fasten the chinstrap and the chinstrap comfort pad.
6. Make sure the chinstrap passes under the chin and fits snugly.
7. Swing the chin bar down until you hear both locks close.
8. Check that the chin bar is securely locked by pressing it up from below
2. TAKING OFF THE HELMET
1. Open and lock the chin bar. Make sure the sun visor is retracted into the
helmet shell.
2. Open the chinstrap.
3. Grasp the ends of the chinstrap and pull the chinstrap ends apart.
4. The helmet can now be removed easily from the head..
5. Close the chin bar.
Tip:
To avoid scratching any objects you might place the helmet on, we
recommend closing the chin-strap after you have taken the helmet off.
38