Noise/Vibration Information; Description Of The Symbols - Ayce NC800AG-125 Manuel D'utilisation

g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from intended could
result in a hazardous situation.
5. Service
a) Have your power tool serviced by qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is
maintained.

NOISE/VIBRATION INFORMATION

Measured sound values determined according to EN 60745-1.
Wear hearing protection!
Vibration total values (triax vector sum) determined according to EN 60745-1: The
vibration emission level given in this information sheet has been measured in
accordance with a standardized test given in EN 60745-1 and may be used to compare
one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool.
However if the tool is used for different applications, with different accessories or
poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period. An estimation of the level of exposure
to vibration should also take into account the times when the tool is switched off or
when it is running but not actually doing the job. This may significantly reduce the
exposure level over the total working period. Identify additional safety measures to
protect the operator from the effects of vibration such as: maintain the tool and the
accessories, keep the hands warm, organization of work patterns.
180726_ayce_NC800AG-125_IM

DESCRIPTION OF THE SYMBOLS

1. Safety symbols
The use of symbols in this manual is intended to draw your attention to possible risks.
The safety symbols and the explanations that accompany them must be perfectly
understood. The warnings in themselves do not remove the risks and cannot replace
correct actions for preventing accidents.
This symbol, marking a point of safety,
!
indicates a caution, warning or danger.
Ignoring this warning can result in an accident
to yourself or others. To limit the risks of
WARNING
injury, fire or electrocution, always follow the
recommendations indicated.
Before any use, refer to the corresponding
section in this user manual.
These symbols indicates the requirement
of wearing ear protection, eye protection,
respirator and gloves when using the product.
Conform to CE safety standards.
Class II symbol: this machine is designed
with double insulation. It is not necessary to
connect it to an earthed power socket.
88 89 |
GB
180726_ayce_NC800AG-125_IM