Publicité
Les langues disponibles
Les langues disponibles
The flux-cored welding machine was conceived to operate
over a long period of time with a minimum of maintenance.
For a continuous and trouble-free operation, you must
perform regular cleaning and proper maintenance tasks.
Regular maintenance ensures that the appliance operates
normally and in accordance with safety precautions.
You must carry out regular inspections of the switch,
grounding, power cord, cables and other connections.
Cleaning
After each use, clean all the components of the flux-cored
welding machine. Wipe the power tool with a clean, damp
cloth or blow it with low pressure compressed air.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept clean.
Clean the ventilation slots regularly or whenever they
become blocked.
Storage
When not in use, store the flux-cored welding machine in a
dry, clean place, free of corrosive smoke and out of
children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
provided for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
Tel.:
+351 256 248 826
E-mail:
international@centrallobao.pt
Site:
www.centrallobao.pt
Publicité
