TCL S470G-CA Mode D'emploi page 9

Power up
Step 2
In this step, we'll make sure all systems are a GO!
Connect your power cable to the TV, then plug it into the wall outlet.
Power your TV remote by inserting the included batteries.
If applicable, connect external devices by referencing port label and
descriptions on page 9.
Power Tip! Always replace depleted batteries with two same brand-new batteries from the same
manufacturer. Never use damaged batteries.
If your remote gets warm/hot during use, discontinue use and contact customer support
immediately at www.tcl.com/ca/en.
Review the Battery CAUTION & Disposal Information on page 3.
Insert batteries in the correct polarity as
indicated in the battery compartment.
7