Télécharger Imprimer la page

Sinbo SHC 4348 Mode D'emploi page 6

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 9
All manuals and user guides at all-guides.com
ENGLISH
Dear Customer
Please read this user manual carefully before using your curling brush, paying particular
attention to the safety notes on this and the following page!
Keep the user manual safe for future reference and also to pass on to any subsequent
owner.
PLEASE ALSO NOTE THE FOLLOWING
• During charging ,the clipper should be placed in a position where there is no contact
with moisture,water or other liquids possible.
• Never try to remove foreign bodies from the inside of the clipper with a pointed
tool(e.g.tail comb).
• Always switch off the clipper before putting it down and between cutting operations.
• Protect the cable from damage.Do not pull the cable.If the cable should become
damaged,contact the Serviece Department.The battery charing stand can be ordered as
a spare part from the Service Department.
• Do not allow the cable to come into contact with hot surfaces.
• Do not touch the moving blades whilst the clipper is swithced on.
• Do not use the clipper if the cutter set is damaged or broken,otherwise injuries could
occur.
• The appliance should not be exposed to temperatures below 0˚C or above +40˚C for
any great length of the time.Avoid exposure to direct sunlight.
• Always turn the appliance off while it is being recharged(the "0" must be visible)
• Electrical appliances are not children's toys.Never allow a child to touch electrical
equipment.
• If any problems or irregularities arise while the appliance is being used it must be
switched off and the plug should be pulled out of the socket.Send the complete clipper
with the adapter to the Service Department to be checked.
• No accessories or battery charging stands other than those supplied by may be used.
• Stubborn marks on the casing can be removed with a cloth moistened with normal
household cleaning spirit.Beware inflammable!Never use petrol,paint thinners or abrasive
cleaning agents.
The clipper is fitted with nickel-cadmium batteries,which have to be disposed of specially.If
your clipper is defective,return it to the Service Department for testing and we will,if
nessary,dispose of the batteries properly.
TECHNICAL SPECIFICATION
• Built in Ni-Cd Battery
• 600 mah
• 8 hours Charging
• Output Power: 3w
- 5 -

Publicité

loading