Reese 30941 Instructions page 6

FOR INSTALLATION WITH M5
HEAD AND CENTER SECTION
In order to maintain performance over the life of the product:
1. Before any trip, verify that all lynch pins, foot bracket and castle nut are undamaged and securely locked, with little to no
vertical play. The image below shows the proper orientation of the lynch pin in relation to the foot.
2. Every 1,000 miles, check the M14 hex bolts that connect center section to legs to insure that they are still torqued to 145
ft-lb of torque.
3. For general maintenance of the entire 5
sheet.
Foot Bracket
©
2022 Horizon Global America Inc.
Product Instructions
TH
MAX DUTY 14K 5
MAINTENANCE
th
wheel hitch assembly, please refer to the M5 head and center section instruction
Handles
(Shown Closed)
WHEEL LEGS FORD/GM/RAM
(shown Closed)
Page 6 of 21 30941N
Part Number:
Lynch pin
Castle Nut
Lynch Pin
(Shown Closed)
01/18/2022
30941
Rev. A