Publicité
Les langues disponibles
Les langues disponibles
Digital Fan Heater
16. It is normal for the heater's plug and cord to feel warm to the touch. A plug or cord that becomes
very hot to the touch or becomes distorted in shape may be a result of a worn electrical outlet. Worn
outlets should be replaced prior to further use of the heater. Plugging heater into a worn
outlet/receptacle may result in overheating of the power cord or fire.
17.
Ensure the heater is on a stable, secure surface to eliminate the potential of tipping it over.
18. Always plug heaters directly into a wall outlet/receptacle. Never use with an extension cord or
relocatable power tap (outlet/power strip).
19. Be sure that the plug is fully inserted into appropriate outlet. Remember that receptacles may
deteriorate due to aging and continuous use. Check periodically for signs of overheating or
deformations evidenced by the plug. If such overheating occurs, do not use the outlet and CALL your
electrician.
20. Check that neither the appliance nor the power cable has been damaged in any way during
transportation.
21. Make sure that no pieces of polystyrene or other packaging material have been left between elements
of the appliance. It may be necessary to pass over the appliance with a vacuum cleaner prior to initial
use.
DANGER: High temperatures may be generated under certain abnormal conditions. Do not partially or
fully cover or obstruct the front of this heater.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT
AND FULLY INSERT.
SAVE THESE INSTRUCTIONS.
4
Publicité
