IMPORTANT SAFETY INSTRUCTIONS
To reduce the risk of fire, electrical shock or personal injury, the following must be read
before using or plugging this electric fireplace into an electrical outlet.
• The heater is hot when in use, do not come in contact with hot surfaces.
• Keep combustible materials, such as furniture, pillows, bedding, papers, clothing, and curtains at
least 3 feet away from fireplace.
• Do not block the air intake or exhaust of the heater in any manner. Do not use on soft surfaces
such as beds, where heater openings may become blocked.
• Needs to be used with wood fireplace mantel
• Use extreme caution when using fireplace near children, or where children may be present.
• Do not leave fireplace unattended
• Do not attempt to move fireplace when hot.
• When not in use, store fireplace unplugged in a dry location
• Do not operate electric fireplace if the cord or plug has become damaged.
• Discontinue use if the heater malfunctions, has been dropped or damaged in any manner.
• Only an authorized service center should attempt to repair electric insert.
• Do not use outdoors, intended for indoor use only.
• This electric fireplace is not intended to be used in bathrooms, laundry rooms, or any other
location where the electric fireplace may become damp, or come in contact with water.
• Never operate electric fireplace where it may fall into a bathtub, pool or any other water container.
• Do not run power cord under carpeting, rugs, runners, or any other covering. Keep cord from
crossing traffic areas to avoid tripping.
• Always turn electric insert off before unplugging heater from outlet.
• Keep area around fireplace neat and clean.
• To avoid electrical shock, fire, or damage to heater, do not insert any foreign objects into
ventilation or exhaust of heater.
• This heater produces arcing sparks, keep all flammable liquids, such as gasoline, paint, or
solvents, away from heater.
• Only use this fireplace as described in this manual. Any other use is not recommended, and may
cause fire, electrical shock, or personal injury.
• Do not alter or modify this fireplace in any manner
• This fireplace is intended for residential use only, not intended for commercial use.
• Position the fireplace in a location near an electrical outlet so the use of an extension cord is not
needed. If an extension cord must be used, it must be a minimum of 14AWG and is rated for
1875 watts.
• This fireplace must be electrically grounded in accordance with local codes.
• This fireplace is to be used on a 120 V, 15 AMP grounded circuit.
• Do not use in an outlet that is controlled by a switch or dimmer switch.
• The cord supplied with the heater is equipped with a 3-blade plug.
The round pin on the plug is for grounding purposes. If a 3-slot
outlet is not available, and adapter must be used. The adapter
must be properly grounded to the outlet box. (see Fig. 1)
• To avoid circuit overload, do not plug any other appliances
into the same circuit as the fireplace.
4
Fig. 1