MSI PRO H610M-E DDR4 Manuel D'utilisation page 23

Onboard LEDs
EZ Debug LED
These LEDs indicate the status of the motherboard.
CPU - indicates CPU is not detected or fail.
DRAM - indicates DRAM is not detected or fail.
VGA - indicates GPU is not detected or fail.
BOOT - indicates booting device is not detected or fail.
JRGB1: RGB LED connector
The JRGB connector allows you to connect the 5050 RGB LED strips 12V.
1
⚠
Important
The JRGB connector supports up to 2 meters continuous 5050 RGB LED strips
∙
(12V/G/R/B) with the maximum power rating of 3A (12V).
Always turn off the power supply and unplug the power cord from the power outlet
∙
before installing or removing the RGB LED strip.
∙ Please use MSI's software to control the extended LED strip.
Pin Signal Name
1 +12V
3 R
21
Pin Signal Name
2 G
4 B