Télécharger Imprimer la page

Hendi 212165 Manuel De L'utilisateur page 7

Masquer les pouces Voir aussi pour 212165:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 17
Main parts of the product
(Fig.1 on page 3)
1. Handle
2. Baking plates (Upper & lower)
3. Drip tray (212189 only)
4. Timer, 0-15mins
5. Heating indicator (Orange)
6. Temperature control knob, 50°C ~ 220°C (MAX)
7. ON/OFF switch
8. RESET button (at the back)
Remark: The content of this manual applies for all listed items
unless specified otherwise. The appearance may vary from the
shown illustrations.
Preparation before use
• Remove all protective packaging and wrapping.
• Check that the device is in good condition and with all ac-
cessories. In case of incomplete or damaged delivery, please
contact the supplier immediately. In this case, do not use the
device.
• Clean the accessories and the appliance before use (See ==>
Cleaning & Maintenance).
• Make sure the appliance is completely dry.
• Place the appliance on a horizontal, stable and heat resistant
surface that is safe against water splashes.
• Keep the packaging if you intend to store your appliance in
the future.
• Keep the user manual for future reference.
NOTE! Due to manufacturing residues, the appliance may emit
a light odor during the first few uses. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated.
Operating instructions
• Clean the baking plate by a moist cloth before first time of
using.
• Connect the power plug with a suitable electrical outlet.
• Switch on the appliance with the ON/OFF switch, it will light
up. Then turn the temperature control knob clockwise to se-
lect the required baking temperature.
• When the baking plate is heating up, the Orange heating in-
dicator light up.
• Wait 5 to 10 minutes for preheating. Once the set temperature
is reached, the Orange heating indicator will go off automat-
ically.
• Now it is ready for baking. Lightly coat the lower baking plate
with butter, margarine or suitable baking oil. Then, spread the
waffle dough evenly on the lower baking plates. Do not pour
too much tough.
• Close the lid by using the handle.
• Turn the timer control knob clockwise to select the required
baking time.
• Orange heating indicator lights up again for heating up. Or-
ange heating indicator will go off.
• Remove the waffles using a waffle fork (not supplied). Never
use abrasive utensils. This may damage the non-stick coating
of the baking plates. Never use bare hands to touch the food.
DANGER OF BURNS!
Note: When you pour the batter onto the hot baking plate, you
might hear some slight cracking noise caused by difference
in temperature. This is normal.
• Close the appliance if more waffles are to be baked, in order
to maintain the temperature.
• After use: set the Temperature control knob and Timer knob
in zero position, the orange heating indicator will go out. After
that switch off the appliance.
Attention! Disconnect the power plug from the electrical
outlet and let it cool completely before cleaning and storing.
Note: Due to the manufacturing residues, the appliance may
emit slight odor in the first few cycles. This is normal and does
not indicate any defect or hazard. Make sure the appliance is
well ventilated during operation.
RESET the safety cut-out (Hi-limiter or thermal
cut-out)
(Fig.2 on page 3)
Please note that a RESET button is equipped with the appliance
to avoid overheat.
• Disconnect the appliance from the power supply.
• Allow the appliance to completely cool down.
• Press the RESET button of the Hi-limiter (thermal cut-out).
You should hear a click sound.
• Connect to the power supply and you can use it again.
Cleaning & maintenance
• ATTENTION! Always disconnect the appliance from the pow-
er supply and cool down before storage, cleaning & mainte-
nance.
• Do not use water jet or steam cleaner for cleaning and do not
push the appliance under the water as the parts will get wet
and electric shock might be resulted.
• If the appliance is not kept in a good state of cleanliness, this
can adversely affect the life of the appliance and result in a
dangerous situation.
• Food residues should be regularly cleaned and removed from
the appliance. If the appliance is not cleaned properly, it will
reduce its lifespan and may result in a dangerous condition
during use.
Cleaning
• Clean the cooled exterior surface with a cloth or sponge
slightly dampened with a mild soap solution.
• For reasons of hygiene, the appliance should be cleaned be-
fore and after use.
• Avoid water contacting the electrical components.
• Never immerse the appliance in water or other liquids.
• Never use aggressive cleaning agents, abrasive sponges, or
cleaning agents containing chlorine. Do not use steel wool,
metallic utensils, or any sharp or pointed objects for clean-
ing. Do not use petrol or solvents!
• No parts are dishwasher safe.
Maintenance
• Check the operation of the appliance regularly to prevent se-
rious accidents.
• If you see that the appliance is not working properly or that
there is a problem, stop using it, switch it off and contact the
supplier.
• All maintenance, installation and repair work must be car-
ried out by specialised and authorised technicians, or recom-
mended by the manufacturer.
GB
7

Publicité

loading

Ce manuel est également adapté pour:

212189